About Contact Environmental FAQS Disclaimer Employment

Paints Wood coatingsWaterbased Self-Crosslinking Lacquer Waterbased Standard Lacquers Waterbased Interior Primers & Enamels Waterbased Enamel Colours Acid Catalyst Lacquers Universal Pre-Cat 280 Range Lacquer Acid Catalyst Pigments, Primers & Enamels 2000 Multi Purpose Sealer Pre-Catalysed Pigemented Products2000 Pre-Catalysed high performance lacquers No. 4 Brushing Cellulose Thinners & Solvents Pre-Catalysed (Cellulose) Aerosol Lacquers LBA 42 - Clear Polyurethane Sealer LGA 20 - Range Clear Polyurethane LDA 200 - Full Gloss (wet look) Clear Polyurethane Acrylic PU Sealer & Lacquers LBR 30 White PU Primer LBR 100 PU White Primer (high build)Pigmented Topcoats Milesi Exterior Joinery Coatings Wood Colour Range Milesi Waterbased Exterior Joinery CoatingStains Floor lacquers Oils Shellac Polishes Waxes Wood Craft Finishes

Mylac (Satin or Gloss)

Mylac (Satin or Gloss) water based floor lacquerA high quality, single pack floor lacquer...

Pre-Catalysed Pigemented Products

Pre-Catalysed Pigmented Products

A range of easy to use pigmented coatings. The primers are fast drying with good levelling and easy sanding. The enamels are fast drying and produce finishes with good feel and surface slip. Recommended where superior resistance to Nitrocellulose is required and where ease of application and repair are more important than durability.

ITEM	SHEEN	SIZE	CODE
		5lt & 25lt

No. 12 Pre-Cat Primer High Build White			12 818 8731
No. 12 Pre-Cat Primer High Build Black			12 818 1139

Enamels
Pre-Catalysed Enamel White Matt	10%		86 P10 9995
Pre-Catalysed Enamel White Semi Matt	20%		86 P20 9995
Pre-Catalysed Enamel White Satin	40%		86 P40 9995
Pre-Catalysed Enamel White Gloss	90%		86 P90 9995
Pre-Catalysed Enamel Black Matt	10%		12 829 9103
Pre-Catalysed Enamel Black Semi Matt	20%		12 827 9103
Dual Thinners			00 802 5432
Standard Thinners			45 802 5430
Retarder Thinners			00 802 5437

Always stir well and check shade and sheen before use.

Coverage
Primers approximately 4 - 6 square metres per litre.
Enamels 1 - 8 square meteres per litre.

Application
Standard products are for application by conventional spray.
Enamels can be sprayed as supplied or 5 - 10% thinners.
Primers can be thinned up to 15-20% or more if necessary.
Consult our Technical Department for use with other spraying techniques.
Special products are available for curtain and roller coating.

Air pressure: 35 - 45 psi
Fluid Pressure: 10 - 15 psi

Drying
Touch dry: 15-20 mins
Sanding/re-coating: 60-90 mins
Packing: Overnight minimum.
Thinners
Dual Thinners: 00 802 5432