AboutContactEnvironmentalFAQSDisclaimerEmployment
Mylac (Satin or Gloss)
Mylac (Satin or Gloss) water based floor lacquerA high quality, single pack floor lacquer...
» Find out more
2000 Pre-Catalysed High Performance Lacquers
The 2000 Pre-Cat lacquers are a high build, fast drying, fast cured product. Suited for applicatons such as internal joinery where pulling over is not an essential requirement.This product can be pulled over within an hour of the top coat drying, however, for a pulled over finish Universal Pre-Cat is more suitable.
In selecting a sealer for our two Pre-catalysed product ranges you have two choices. We recommend that you try multi purpose first. Medium build with very good sanding qualities. Alterntively the 2000 Pre-catalysied sealer is suitable for both ranges. Higher build but slightly harder to sand. These two sealers cover all necessary requirements!
Coverage
Approximately 5 - 7 square metres per litre.
ApplicationStandard products are for application by conventional spray. Lacquers spray as supplied. Consult JM Technical Department for with other spraying techniques. Air pressure: 35 - 45 psi Fluid Pressure: 10 - 15 psi Drying Touch dry: 15-20 minsSanding/re-coating: 60-90 minsPacking: Overnight minimum. Thinners Dual Thinners: 00 802 5432